There are three selection modes: moving and changing size, rotating, and editing points.
When the Points button is not active, the default mode is for selections to be moved or changed in size; these selections are indicated by small green squares.
When the Points button is active, the default mode is for selections to be edited; these selections are indicated by blue squares. Some objects will have one or more extra handles, which are larger or colored differently. This is explained in more detail in the Draw Guide.
Selections for rotating objects are indicated by small red circles and a symbol representing the center of rotation. To choose these selections, click on the Effects drop-down button from the Drawing toolbar.
Changing the selection mode
To go from one mode to another, you can do one of the following:
- If necessary, toggle the Points button on the Drawing toolbar to switch from the simple selection mode to the Points mode . You can also use the keyboard shortcut F8 (Points).
- Choose the Effects drop-down button from the Drawing toolbar to activate the Rotation mode for a selected object.
- By choosing the Rotation Mode after Clicking Object button from the Options bar, you can cycle through normal and rotation modes just by clicking on the object. This can be more convenient than clicking the object, then clicking the Rotate button from the Drawing Toolbar.
|Content on this page is licensed under the Creative Common Attribution 3.0 license (CC-BY).|