GNU Linux Sparc Porting

From Apache OpenOffice Wiki
Revision as of 08:00, 11 February 2007 by Pmsyyz (Talk | contribs)

Jump to: navigation, search

The objective is to maintain the upstream sources so that the GNU/Linux SPARC platform can be packaged for example by Debian, Gentoo, and others. Also to provide an upstream "benchmark" version that can be installed for checking who owns any bugs, while not interfering with the distribution's installed packages. For GNU/Linux SPARC all Java building is done with gcj.

Other projects that need more work:

  • fix multimedia
  • more qa needs to be done

The latest upstream release is on mirrors under contrib/linuxsparc

What is SPARC?

SPARC means Scalable Processor ARChitecture about SPARC

The most common hardware implementation is done by Sun.

Most GNU/Linux SPARC users are running second-hand hardware which may be quite old and the installed user base and developer resources are relatively small.

There are 2 main flavours of SPARC hardware:

32 bit known as sparc (uname -m returns sparc)
64 bit known as sparc64 (uname -m returns sparc64)

GNU/Linux is ported to run on both sparc and sparc64, there are separate kernels for sparc and sparc64 but the majority of user software is designed to run on both sparc and sparc64.

For example on my system I can find these files:

jim@sun:/boot$ file vmlinux-2.6.13
vmlinux-2.6.13: ELF 64-bit MSB executable, SPARC V9, version 1 (SYSV), statically linked, not stripped
jim@sun:~/o147/program$ file soffice.bin
soffice.bin: ELF 32-bit MSB executable, SPARC, version 1 (SYSV), for GNU/Linux 2.2.0, dynamically linked (uses shared libs), stripped

So the first issue for porting is, how to build the 32 bit product on a 64 bit system? The simple and correct method is to build in a shell where the command "uname -m" will return "sparc" on a "sparc64" machine. This is achieved by using the command "sparc32 bash" or "linux32 bash" to get the shell for building. See here for a more authoritative comment

Which shell to use for building, sparc or sparc64?

But for maintaining the port I prefer to not use the sparc shell (from the "linux32 bash" command) because that might hide some bugs or bad behaviour. For GNU/Linux Sparc the 32 bit product can be built in the sparc64 shell, by the simple method of:

compiler flag "-m32" will tell gcc to build sparc and not sparc64

In the past bad behaviour occurred when a module ignores the configured compiler path or compiler flags. For example:

configured to build with "/usr/local/4.1/bin/gcc -m32"
module builds with a different "gcc" for example /usr/bin/gcc"

Currently there are no examples of this bad behaviour. This will not be easily noticed unless all alternative possible compilers are excluded from the configured environment path. Still there remains a risk that a module will seek "/usr/local/bin/gcc" and find it. This sometimes seemed to involve using libtool which may have some defaults configured on the build machine?

In summary, building in the sparc shell is the simple and correct method, but building in a sparc64 shell is better for finding bugs.

Specific code for GNU/Linux SPARC

There are only a small number of places where GNU/Linux SPARC requires different code than used by other GNU/Linux platforms. The following list is not complete but it provides some examples and will be gradually increased. For a full history of the GNU/Linux SPARC port just query Issuezilla for issues where sparcmoz has reported or commented.

Platform Make file

Various compiler and other flags are set in the platform Make file solenv/inc/ That file is kept as close as possible to solenv/inc/ but the following differences are important:

If the assembler is called directly, it must build for sparc v7 by default (could use v8 safely?) and not v8plus or v9

# mk file for unxlngs

Code must be compiled with -fPIC, as -fpic will not do for sparc/sparc64


Platform specific identifier for shared libs


Module sal

GNU/Linux SPARC did not provide an implementation of frame.h that was needed for backtrace functions. It was also needed to provide the backtrace function without using the crash reporter. Backtrace is currently broken, possibly something here:


The following code provides runtime detection of the user hardware (sparc or sparc64) and loads some different code at start up.


This file is modified to build the preceding files


Need to force 8 byte alignment:


Module sc

A number of runtime isssues (crash) were found with the early builds of the spreadsheet using gcc 3.2. A workaround was found to compile certain files with no optimisation. A review of the code suggests similar issues were found with other platforms, but in different files. The files were found fairly quickly by using a binary search pattern to locate the files that caused the crashes (build - test - crash - build half the files again without optimisation). Fortunately this type of work-around is supported by the build system environment variables NOOPTFILES and EXCEPTIONSNOOPTFILES! It is possible some of these issues have gone away with later compilers, further investigation is needed. Refer to the source code as follows:

sc/source/core/data/ "$(OS)$(COM)$(CPUNAME)"=="LINUXGCCSPARC"
sc/source/core/tool/ "$(OS)$(COM)$(CPUNAME)"=="LINUXGCCSPARC"
sc/source/filter/excel/ "$(OS)$(COM)$(CPUNAME)"=="LINUXGCCSPARC"
sc/source/ui/unoobj/ "$(OS)$(COM)$(CPUNAME)"=="LINUXGCCSPARC"
sc/source/ui/view/ "$(OS)$(COM)$(CPUNAME)"=="LINUXGCCSPARC"

A typical example follows from sc/source/core/data/

               $(SLO)$/column2.obj \
               $(SLO)$/column3.obj \
               $(SLO)$/table3.obj \
               $(SLO)$/table4.obj  \
               $(SLO)$/documen4.obj \
               $(SLO)$/conditio.obj \

Module bridges

The bridges code in bridges/source/cpp_uno/gcc3_linux_sparc is copied exactly from the corresponding gcc3_linux_intel and only the assembler snippets have been changed.

TODO: describe bridges code

TODO: configuration, installation

Building with GCC 4.1.2 (preview)

I don't mention here any issues that affect gcc < 4.1

The main issue affects runtime i59722 gcc-4.1: undefined usage of pointers in the icu module

Get the up-to-date patch here, but browse to check for any later version:

In my case GCC 4.1 is built using sources checked out by svn from gcc-4_1-branch and installed in /usr/local/4.1 with these configure flags: --prefix=/usr/local/4.1 --enable-java-awt=gtk,xlib

For GNU/Linux SPARC m173 builds with warnings, so to make warnings be errors it is proposed to adapt the code for warnings01 in solenv/inc/, see issue 67001

Step 1: get a version of gcc with suitable gcj

In my case I get the latest preview gcc4.1.2 sources and build gcc into /usr/local/4.1

Step 2: set up the required commands for build tools

Note that the required compiler can be specified by setting environment variables CC and CXX before running configure. The code expects some "java" commands to be available in the PATH: java jar javadoc. Different distributions provide those commands in different ways, but when using one's own gcc built from upstream sources then gcc provides instead the corresponding commands: gij fastjar gjdoc. To adapt the code to those commands use cws_src680_maho1. Finally there is an issue with internal ant commands in build files in xmerge so that a symbolic link is needed: javadoc-> gjdoc

Step 3: configure

In my case the configure commands may be like this:

$ export CC="ccache /usr/local/bin/gcc -m32"

$ export CXX="ccache /usr/local/bin/g++ -m32"

$ ./configure --with-jdk-home=/usr/local/4.1 --with-java=gij \

--with-ant-home=/usr/local/apache-ant-1.6.5 \

--enable-crashdump=STATIC --enable-symbols=SMALL --enable-build-mozilla \


Now if configure reports that "ant does not work" try this: export PATH=/path/to/gcj:$PATH

Some additional hoops to jump through for the crash reporter

Step 4: Build

berkeleydb - see issue 54657
berkeleydb has hardcoded "java" command with fallback to JAVA but environment defines JAVAINTERPRETER. the fix is in cws_src680_maho1
sal: Since m166 some memory alignment problem will cause bus errors (signal 10 or SIGBUS) on GNU/Linux SPARC. 
This is referenced at  issue 65788 and the workaround is configure --with-alloc=system
moz: some recent change in GCC? (4.1.2)  mimeExternalObjectClass' with 'C++' linkage
mimemult.cpp:76: error: conflicts with new declaration with 'C' linkage
issue 66906
vcl: as we build with xorg7 and build nas, vcl needs to link libXau See patch at Issue 64134
svx and binfilter: build problem in m186, see patch here: i70684

Installing from rpm without root access

The GNU Linux Sparc packages from contrib/linuxsparc should not interfere with installations provided by the various distribution packagers such as debian, gentoo etc. Therefore the supplied rpms can be installed in the user's home directory using the script which is available on mirrors at pub/

The rpm command is required but root access is not required

Personal tools