This page has FAQs about formatting text in Writer.
Note: Many of these FAQs were originally written for OpenOffice.org 1.x and may not have been updated to reflect changes in OOo 2.x. We are working on checking updating all of them, but this takes a lot of time and more volunteers are needed. If you find an answer that is out of date, please either correct it or leave a comment on the "Discussion" tab of the relevant page.
Up to date information can be found in the Writer Guide, available from the OOo Documentation Project.
- 1 Fonts and characters
- 1.1 How do I change the default font?
- 1.2 How to easily come back to the default character format while typing when I just wanted to format one word?
- 1.3 How do I insert a special character?
- 1.4 How do I insert a trademark symbol?
- 1.5 How do I insert an unbreakable space?
- 1.6 How do I insert a 'Euro' character?
- 1.7 I want to insert special characters with keyboard shortcuts. How do I do this?
- 1.8 Does OpenOffice.org have a Reveal Codes functionality similar to WordPerfect?
- 2 Selecting, moving, and formatting text
- 2.1 How to format a piece of text (not a whole page) in columns?
- 2.2 How to correct the text of a hyperlink? (if I click on the text the target document loads)
- 2.3 How to move paragraphs with the keyboard?
- 2.4 How to select multiple parts of the text?
- 2.5 I have some text that I want to appear with the first character of each word in uppercase and the rest of the word in lowercase (initial uppercase or 'title case'). How do I do this automatically?
- 2.6 How do I create a hanging indent in my document?
- 2.7 Is there something like a Format Painter feature that copies the formats of one part of the text to other parts?
- 2.8 How do I use styles?
- 2.9 How do I create a simple outline-style numbered list?
- 2.10 How do I remove a large number of hard returns from text that were pasted into my document (for example, from an email message)?
- 2.11 The space between the letters in a word seems just a bit too wide. It would look better if that space is being reduced. How can I achieve this?
- 2.12 How do I protect (lock) a section of text so that the content cannot be changed?
- 2.13 How do I assign a keyboard shortcut to a style?
- 3 Checking spelling and grammar
Fonts and characters
How do I change the default font?
You can set the default font in Tools > Options > Text Document > Basic Fonts, but that doesn't change the size of the font.
To change the size of the default font as well as the font itself, make the change in the default paragraph style. Then make the document into a template and set it as the default template.
Here's how to do all this:
- Open a blank document.
- (Optional) Use Tools > Options > Text Document > Basic Fonts. Select the font from the drop-down lists. Click OK to save.
- Press F11 to open the Stylist. Go to the Paragraph Styles tab. Right-click on Default and choose Modify. On the Font tab, set the required typeface and size. Click OK to save.
- To save this document as a template, use File > Templates > Save. Give the template a name and save it in the Default folder. (You can put it anywhere you like, but that makes it easy to find again.) Click OK.
- To make this template the default template, use File > Templates > Organize. Select the template you just created, then click Commands > Set As Default Template.
Now any text documents you create with File > New (or the New icon) will have the typeface and size you want.
It's not as much work as it sounds, and you only have to do it once. And as long as you're going to that much trouble, you could set up a few other things in the default template while you're at it: margins, paragraph spacing, printer setup, and so on.
If you want different default fonts or sizes for different types of documents, you can set up several templates and use File > New > Templates and Documents (instead of File > New) to choose one when starting a new document.
How to easily come back to the default character format while typing when I just wanted to format one word?
Example: you write default, then underlined for a while and you want to come back to the normal styles.
In this example, you have pressed [Ctrl]+U after "then" to format your text italic.
To return to the normal attribute press [Right] immediatly after the first "to" as following:
You write default, then [Ctrl]+U underlined for a while and you want to [Right] come back to the normal styles.
How do I insert a special character?
The simplest method for inserting special characters is to select them from the special character dialog:
- From the menu bar, select Insert->Special Character.
- In the dialog that appears, all the available characters in the current font will be displayed.
- Select a character by clicking on it. If you do not see the desired character, it may not be available in the current font. If it is not there, try changing fonts.
- After selecting one or more characters, click [OK] to insert the characters at the location of the text cursor.
On certain platforms, OpenOffice.org does not have certain characters available in any font, including emdash and curly double quote characters.
Characters used in mathematical formulas may be inserted using this method:
- From the menu bar, select Insert->Object->Formula.
- In the Command window, hold down the right mouse button to access the context menu. The available formula operators can be found within this menu.
- The Command window does not have a close button - so just click outside the formula box (anywhere else in the document) to close it.
Formulas are graphical objects and characters inserted using this method may not convert well to other applications. OpenOffice.org also supports entry of certain characters (accented characters, ligatures, monetary symbols, etc.) via compose (keyboard) sequences.
How do I insert a trademark symbol?
This symbol is only available in certain fonts. On Solaris platforms, the symbol is available in the 'Symbols', 'Serif' and San-Serif' font. To insert:
- Place the cursor in the location where you want the symbol to appear.
- From the menu bar, select Insert->Special Character.
- In the dialog that appears, choose Symbol from the Font list.
- The trademark symbol is available in a serif font (character 212) or in a san-serif font (character 228). Click on the symbol desired.
- Click OK.
How do I insert an unbreakable space?
Cntl+Space: Hold down the control key while you type a space.
This and other keyboard shortcuts can be found in Help > Contents > Index tab > keyboard shortcuts.
How do I insert a 'Euro' character?
The Euro currency symbol is only available in some fonts. ('Times' and 'Helvetica', which are commonly used, do not include the Euro symbol.) Follow these instructions to enter a Euro symbol:
- From the menu bar, select Insert -> Special Character.
- In the dialog that appears, change the font selection to a font where you can see the Euro character appear in the '128' character position. The '128' position is in the first column, fourth row.
- Highlight the Euro character by clicking on it.
- Click OK to insert.
Be aware that, if you output your file to HTML, the Euro symbol will be converted to '¤' (curren).
I want to insert special characters with keyboard shortcuts. How do I do this?
From OpenOffice.org Version 1.1 on you can use the built in macro recorder. To assign a character to a key, follow these steps:
- Select Tools > Macro > Record to start the recording process.
- Now click Insert > Special Character and choose the character you want,
then insert it and close the special character dialog.
- Click on "Stop recording" in the small macro recorder dialog.
- A dialog appears asking you to save the macro with a name.
Be sure to save it under Standard, not in the tree for the document currently open. That way you'll be able to use the macro use it any time a OOo Writer window is open.
Now that you have recorded the macro, you'll need to assign it to a keystroke.
- Select > Tools > Macro > Macros ..., then > Assign.
- Now follow > Keyboard > Functions and find your macro using the Category tree.
Your macro will appear in the Function window when you've found the right module.
- Select a keystroke in the Shortcut Keys list, and click Modify.
The key you have selected will appear in the Keys window.
Does OpenOffice.org have a Reveal Codes functionality similar to WordPerfect?
No, OOo does not have this function.
Selecting, moving, and formatting text
How to format a piece of text (not a whole page) in columns?
You have to use a section:
- Select the text you want to format
- Menu Insert-Section-[Columns]
Quick method: [Alt]+click
Permanant state: in the status bar at the bottom of the screen, click the field "HYP" (HYPerlink) to change it to "SEL" (SELection). You can now select the text/graphic of the hyperlink. (Change back to HYP at any time by clicking SEL.)
How to move paragraphs with the keyboard?
- Set the cursor in the paragraph you want to to move
- [Ctrl]+[Up] or [Down]
How to select multiple parts of the text?
Copy, cut, format, delete parts of the text in different areas of the document:
- [Ctrl]+<selection> with one click, double-click or sliding.
Another method exists - the "lazy" one (don't feel about holding [Ctrl] over 150 pages!):
- Click once on the field "STD" (STanDard) in the status bar
- The field shows now "EXT" (EXTended selection)
- Another click and it goes to "ADD" (ADD to selection).
-> the ADD mode has the same function than [Ctrl] + click
and EXT the same function than [Shift]+click.
I have some text that I want to appear with the first character of each word in uppercase and the rest of the word in lowercase (initial uppercase or 'title case'). How do I do this automatically?
Follow these steps:
- Select the desired text (for example, by drag selecting).
- From the main menu bar, select Format -> Character (or right-click on the selected text and choose Character).
- On the Character dialog, choose the 'Font Effects' tab.
- In the 'Effects' drop-down list, choose 'Title Case'.
- Click on OK.
This method also works for anything that can be drag-selected, such as a table row or column.
Note: You can also set up a paragraph or character style with this characteristic and apply the style. For example, if you want all Level 1 headings to be in title case, change the Heading 1 paragraph style and apply that paragraph style to all Level 1 headings.
How do I create a hanging indent in my document?
You have two basic options, depending on how you want your hanging indent to look.
- Using a pre-defined style:
- Open the Format Stylist (select: Format -> Stylist from the pulldown menu)
- Have the text cursor in the text that you want to format as hanging indent (or have the cursor in an empty text style and enter the text later)
- Double-click on the "Hanging indent" choice in the Stylist window. This default style has a hanging indent - but it also has a left margin offset of .19 inches.
- Create your own style:
- Open the Stylist (as described above)
- Select one of the "generic" styles such as "Standard"
- Right click (in the Stylist window) to get the context menu and select "New ..."
- In the dialog that appears, enter a new name for the style
- Click on the "Indents & Spacing" tab. For a .25 inch hanging style, you would enter ".25" in the "Indent From left" field. Then enter "-.25" in the "Indent First line" field * Click on "OK". The new style will be available in the Stylist list.
Is there something like a Format Painter feature that copies the formats of one part of the text to other parts?
There are two possibilities within OOo Writer.
For the first, follow these steps:
- Make the changes that you want, then, with the cursor still in the paragraph, open the Stylist and then you can either
- Highlight a portion of the text, hold down the left mouse button and drag the text over the style name then release the mouse button, or
- Left click on the very far right icon in the Stylist header. This icon is called Update Style.
- Now, if the changes you have made haven't been transferred already to the other relevant parts of your text, click on the "Fill Format" icon in the Stylist, which is the third from the right. The button is a toggle - so click once to turn the feature on, and click again to turn it off.
- Once it is on, select the style from the list to which you've just made the changes, then click into the text area that you want to change.
Another solution would be to actually add a button that acts like a format painter: It's an unofficial, but excellent addon written by the Francophone project. It adds two paintbrush icons to the tool bar, which copy and paint styles. Get it from here: 
How do I use styles?
These chapters in the Writer Guide show how to use styles in Writer:
How do I create a simple outline-style numbered list?
It should look like this:
1. List Title 1.1 First Item 1.2 Second Item 1.3 Third Item
There are two tools in OpenOffice.org that give you the ability to create numbered lists. One is the Styles and Formatting window, accessed by pressing F11. It will open in a separate window and will default to opening the "Paragraph Styles" view. If you click on the fifth icon from the left, "Numbering Styles", you will see a list of pre-defined number styles. The other tool that you need is the numbering toolbar. This will appear when you are in a text area that has a numbering style assigned. It turns out that the numbering you want for the simple list above is already defined in the pre-defined numbering styles. If the style you need does not exist, you may also create your own styles.
To create the list above:
- Type in your text. The paragraph style that you use should not matter. This procedure was tested using the "Text body" paragraph style.
- Select all the text by drag selecting.
- Double-click on the numbering style "Numbering 5". List numbers (but not the sub-numbers) should appear.
- Place the text cursor into the list item that says "First item".
- Click on the right pointing arrow (the single one) in the numbering toolbar. Its name is "Move Level Down". This item should now have the number "1.1" in front of it.
- Repeat the above step for the other sub-list items.
If you need to make your own list numbering style, it is suggested to select one of the existing styles that is similar (in the Styles and Formatting window), then right-click to get a context menu. Select "New..." to make a new style based on the style that was selected. You will get a dialog with many tabs that allow you to configure your own numbering style. See <a href="http://documentation.openoffice.org/manuals/oooauthors2/0207WG-WorkingWithStyles.pdf">Chapter 7, "Working with Styles"</a> in the Writer Guide for more information.
Note: OpenOffice.org will often make numbering difficult when you do the following actions:
- Press the backspace key when you are in the style following a numbering style.
- Insert unnumbered styles between numbered styles.
- Output to HTML format with noncontiguous numbered and unnumbered styles.
How do I remove a large number of hard returns from text that were pasted into my document (for example, from an email message)?
Follow these steps:
- Select Edit -> Find & Replace.
- Near the bottom left of the dialog that appears, click on the box next to "Regular Expressions".
- In the "Search For" field, type: ^$ This regular expression says to search for a paragraph marker '$' at the beginning of a paragraph - programmer terms for an empty paragraph.
- Click on the "Find" button.
- To replace the hard return with a space character, type a space in the "Replace With" field, then click the "Replace" button.
- To replace the hard return with nothing (remove the character), click the "Replace" button (without entering anything in the "Replace With" field).
- If you have many hard returns to replace, you can also use the "Replace All" button. It is wise to save your document prior to using this option, in case it behaves unexpectedly.
Note: Regular expressions do not appear to work in the "Replace" field.
The space between the letters in a word seems just a bit too wide. It would look better if that space is being reduced. How can I achieve this?
What you need to enable is "Kerning". Kerning is part of the typesetting process, where the space between letters is adjusted to the appearance of the letter and its neighbour. For example, when a V is followed by an A, the shape of the letters would result in a little too much space between them, and this just doesn't look nice. The A should be moved a little towards the V.
So how do you enable kerning?
If you need kerning only for selected parts of your text, follow these steps:
- Highlight the passages of your text for which kerning needs to be enabled.
- Now > Format > Character > Position > Spacing, here check box "pair kerning".
If you need the whole text to be "kerned", follow here
- Press F11 to open the stylist.
- Click on paragraph styles icon to open the list of paragraph styles.
- Rightclick on each paragraph styles that's being used > Modify.
- Now > Position > Spacing, here check box "pair kerning".
Note that kerning is controlled by information in the font data (in particular the font metrics). Fonts that do not need such precise corrections, like fixed width fonts, will not be subject to kerning.
How do I protect (lock) a section of text so that the content cannot be changed?
Follow these steps to protect a section of text:
- Write or otherwise insert the desired text
- Select the text to be protected
- From the pull down menus, select: Insert -> Section
- Click on the box next to "Protected"
- Give the section a name (or take the default name assigned)
- Click on Insert
- You may also want to create a password on the section. This will keep anyone without the password from removing the protection set on the section.
To insert a password on a protected section:
- From the pull down menus, select: Format -> Sections
- Select the name of the desired section (if, applicable)
- Click on the box next to "Password protected"
- In the dialog that appears, enter a password and confirm the password
- Click on OK (in the password dialog)
- Click on OK (in the format section dialog)
Follow these steps to modify a section that you have previously protected:
- From the pull down menus, select: Format -> Sections
- Enter your password in the dialog that appears (only appears if password protected); Click OK
- Select the name of the desired section (if, applicable)
- Click on the "Remove" button
- Click on OK
- Make the desired changes
- Follow steps in the "protect a section of text" instructions, above, to re-apply the section protection
Note that, once you put a password on a section, you will be prompted for that password before receiving any dialog that might have a chance to access that section of text.
How do I assign a keyboard shortcut to a style?
You can assign keyboard shortcuts to frequently used paragraph and character styles.
- Go to Tools > Customize.
- Click on the Keyboard tab.
- In the Category list, select Styles > CharacterStyles. In the Function list, click on the name of the style.
- Select a key combination and click Modify.
- Click OK to save the change.
Note: You can do the same on the Toolbars tab to assign a style to a toolbar button.
Checking spelling and grammar
Is there a grammar checker?
No, OpenOffice.org doesn't have a grammar checker implemented.
Where do I get a dictionary for my language?
Some dictionaries are installed with OpenOffice.org. Look in Tool->Options->Language Settings.
If you do not find one already installed with the program, look here: <a href="http://lingucomponent.openoffice.org/download_dictionary.html">http://lingucomponent.openoffice.org/download_dictionary.html</a>.
My spellchecker does not seem to work?
Check the language settings for your document and whether a spellchecker is active for that language. Choose Format->Character. On the "Font" tab, check "Language"; there should be a tick mark beside the relevant language.
How do I setup the spellchecker to be the correct default for my language?
Go to Tools->Options->Language Settings->Languages to set the default language.
How do I perform a spellcheck in a multilingual text?
When OOo checks the spelling of a word (note: word, not paragraph or text) it chooses the spelling dictionary appropriate to the language this single word comes from. This is defined in Format->Character->Font. This individual language setting normally is set to the default language but can be changed to any other supported language.
So, to perform a spellcheck on a multilingual text you need to select each word that isn't part of the default language and assign the appropriate language in Format->Character->Font.
However, if you want to set the whole text to a new language, highlight the whole text and change the setting in Format->Character->Font.
Note: If you use character or paragraph styles, you can specify the language in the style, then apply a different style to selected words or paragraphs.