Apache OpenOffice Building Guide
- 1 Preface
- 2 Getting help
- 3 Basics
- 4 Getting the source
- 5 Organization of the source and output tree
- 6 Building
- 7 Step-by-Step Building Guide for Different Platforms
- 8 Building Apache OpenOffice with an IDE
- 9 Additional Build Resources
This guide will help you to build Apache OpenOffice from its source code. It details the prerequisites and explains how to download the source code, prepare and then run the build. Step-by-step instructions for resolving the pre-requisites of individual platforms and building on them are available.
These instructions are for the "trunk" branch, that is the current development release. If you are looking for instructions to build specific releases, refer to section #Step-by-Step Building Guide for Different Platforms as well.
Here is the short version for the brave and impatient:
git clone https://gitbox.apache.org/repos/asf/openoffice.git
git clone https://github.com/apache/openoffice.git
cd main/ ; autoconf ; ./configure <some-switches> ; ./bootstrap
source <platform-dependend-name>.sh ; cd instsetoo_native ; build --all
- Wait for an hour or more (The build can take up to 3 hours.)
The compilation can be automated by the build scripts.
The detailed description below gives a broader introduction into the build process and explains for the various steps.
|This document is loosely based on an older version. I have tried to avoid duplication and to move anything that all platforms have in common to this page. Many details have been removed on purpose because they refer to older version of OpenOffice.|
- How to use cache
You can get help by searching this wiki or by asking questions on the developers mailing list.
You can help us improve this guide by pointing out any errors (preferably after finding a solution). Or don't be shy and edit (and improve) these pages yourself.
In order to build Apache OpenOffice you need a proper environment. This includes
- a command line interpreter, typically bourne shell compatible (sh or bash) inside a terminal. On Windows you will need to install Cygwin to provide it.
- C++ compiler and linker. The exact choice depends on the operating system.
- Perl interpreter and several modules.
- Many tools from the Unix world like make or sed.
See section General Build Requirements for an exact list of requirements.
Getting the source
Since August 2019, the source code is available as Git repository at https://gitbox.apache.org/repos/asf/openoffice.git, or https://github.com/apache/openoffice.
Check it out with
git clone https://github.com/apache/openoffice.git
Git is the preferred way for developers to obtain the source code. After cloning the repository as described above, you will be able to track the current development branches and also quickly switch to the latest official releases ("tags"). For example, to check out the source code for Apache OpenOffice 4.1.8 issue the command:
git checkout tags/AOO418-GA
If a full-blown repository clone is not necessary, for example because you just want to download and build a specific release, more details about how to check out source code can be found here.
The checked out files take up somewhat over 5GB on disk (more than 150000 files in more than 7000 folders and the version control overhead).
After building this becomes (on Windows7) almost 17GB (more than 406000 files in more than 23000 folders).
Organization of the source and output tree
The source code has five top level directories:
- contains most of the so called modules. Each module typically provides one or more libraries. The source code of the writer application for example can be found in
main/sw/. More information on the organization of the modules in the source code directories here.
- contains the new automated testing framework
- is the new home of modules that build external libraries (libraries maintained outside of Apache OpenOffice and often outside Apache).
- contains the tar balls (archives) of external libraries. They are included both for convenience and to make sure that specific versions remain available. Note that the source package of the Apache OpenOffice release does not contain any external tar balls.
- holds the localization data.
Most tools and scripts that are used for building are located below
- dmake makefiles in
- gmake makefiles in
- executables and perl files in
- perl modules in
Libraries and other output files that are shared between modules are stored in
Building Apache OpenOffice consists of three steps:
- Detect platform, operating system, compiler, etc. and write the information into a shell script for later use. The developer can turn on or off certain features in this phase.
- Compile the source code, transform other input files, apply localization.
- Create a set of files, the installation set, that can be installed on the respective operating system. This can be msi/cab files for windows, deb or rpm for Linux, dmg for Mac.
The configure step has to be carried out only once. Building and packing is necessary after every source code change. There are short cuts to avoid parts of these steps (when you know what you are doing.)
The building examples in this wiki document use only command line approaches to building. Depending on your expertise, it may be possible to use an IDE which allows specification of custom build scripts.
Official releases are built using build scripts to automate the process.
General Build Requirements
The general requirements for all platforms are
|Java JDK|| Java Implementation compatible with JDK 1.7 or higher. OpenJDK is supported as well.
For Windows JDK 1.7 or JDK 1.8 is recommended. The JDK's bitness must match the target platform's, e.g. when building for Win32, use a 32-bit JDK even if compiling on Win64.
|Perl|| Perl 5 - note: for Windows Perl will be installed as part of the Cygwin environment.
Also required are the perl packages
On Linux, use whenever possible your package manager to install the required modules. On Windows, use cygwin's setup-x86.exe or setup-x86_64.exe.
The name of packages varies depending on the system:
On some rather old systems, LWP::Protocol::https is installed in the same package as LWP::UserAgent; in this case, you need to install further dependencies in order to use LWP::UserAgent with the HTTPS protocol with no errors; on CentOS 5, for example, you need to install the Crypt::SSLeay module, provided by the perl-Crypt-SSLeay package.
On Mac OS X, bootstrap may fail to download external dependencies from HTTPS URLs (you may get an error with a message like "Can't verify SSL peers without knowing which Certificate Authorities to trust"), even if configure found all required modules; in this case, install the Mozilla::CA module using cpan.
On CentOS, perl-Digest-SHA might be only provided through the EPEL repository.
The prefered way to install Perl modules is using your system's package manager; alternatively, and as last resort, Perl modules can be installed from the shell with (you may have to run it with super user/administrator rights)
perl -MCPAN -e shell
If it is executed for the first time then CPAN will ask for configuration. Choose autoconfiguration. Eventually the CPAN shell appears accepts commands. Install missing modules with
Find more details here.5
|CUPS|| cups headers. Provided by a cups-devel package or a libcups2-devel
note: not for Windows
|PAM|| PAM support. Provided by a pam-devel package or a libpam-dev
note: not for Windows
|Apache Ant||Ant 1.9 or later (see note)||--with-ant-home=|
|Archiver||zip and unzip - note: for Windows zip and unzip will be installed as part of the cygwin environment.|
|gperf||gperf tool - note: for Windows gperf will be installed as part of the cygwin environment.|
|NSS1||For Windows the MozillaBuild tools2 are needed to build the NSS module. MozillaBuild tools version 3.0 or newer require a 64-bit Windows. When building on 32-bit Windows it is recommended to use version 2.2.0. They can be obtained here.|
|unowinreg.dll|| pre-built unowinreg.dll (see NOTE)
Required for building the ODK which is included in the build unless disabled. This file is required for non-Windows builds. Without this file, configure will try to set up cross-compiling with windows. NOTE: Not for windows. Required on all non-windows platforms. Download by directly saving unowinreg.dll into /main/external/unowinreg from the link provided above, or by using wget:
cd $SRC/main && wget -O external/unowinreg/unowinreg.dll https://tools.openoffice.org/unowinreg_prebuild/680/unowinreg.dll
- The NSS module ("Network Security Services") provides security services needed for e.g. password protection. NSS can be disabled using the configure switch --disable-nss-module.
- NSS is provided by the Mozilla project. Building it on Windows requires the MozillaBuild tools. Install it and use the configure switch --with-mozilla-build to tell configure where the tools are installed. For example: --with-mozilla-build=c:/mozilla-build
- Please note that CPAN is not able to deal with usernames containing spaces. To work around this fact, when CPAN asks you to specify the CPAN build and cache directory, change the default suggestion to /cpan.
- Apache Ant: Assure a proper ant set-up by downloading and installing ant, in total, from the ant site linked above. If you are a Linux developer, your distro may not have ant setup correctly for building Apache OpenOffice.
- Use ./configure --help to see all possible configuration options
See also the platform specific requirements for
Configuration and bootstrapping
This is typically done only once after the source code is checked out. Repeat this after changing your mind about options given to configure.
The call to
creates the main/configure script from main/configure.in and some other input files.
The set of options/switches given to configure depends on the platform and your choice of features. To see all configure options for your system, type:
A typical configuration call starts like this --
./configure \ --with-dmake-url=https://github.com/jimjag/dmake/archive/v4.13.1/dmake-4.13.1.tar.gz \ --with-epm-url=https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz
It tells configure where to find the source code of external tools dmake and epm.
By default only source code under category A licenses is compiled and included. Besides the Apache License 2.0 this includes for example BSD and MIT/X11 license. If you want to enable features that rely on third party code under category B licenses (like MPL, CPL, EPL, etc) then add the option
For inclusion of externally hosted dictionary extensions add option
Note that dictionaries rely on a category B third party library (hunspell). Therefore
--enable-category-b is a prerequisite for
--enable-bundled-dictionaries. Dictionaries have a variety of licenses and are bundled without modification: they are not compiled.
--with-lang option will introduce the build of additional language resources. This switch accepts one or more RFC 1766 language tags as arguments, unfortunately not all languages are supported. Check the
solenv/inc/langlist.mk file for all the currently supported language tags. The environment variable WITH_LANG will then contain the language tags of the additional (en-US will always be build) languages. Example:
enables the build of the localized German and French version.
To build with symbolic generation, add option
This would allow you to work with debugging symbols in gdb.
Another useful option for interactive debugging features is dbgutil. Add option,
for this feature. This will result in a Non Product Build. Also see the Debugging information on this page.
By default the result binaries will be packaged in the default format used by your OS/Distribution. Using 'installed' for package format puts OpenOffice into your installset directory (browse down ../installed/install). This will save you time for testing since you can then directly run OpenOffice from this area.
This will speed up development process since it skipped packaging. In some cases, packaging rips the debugging symbol, so this would be necessary for symbolic generation.
You can run the rat scan while building with option
Here you can find details of the rat scan.
Finish this step by running
This will build dmake and epm, download missing source code tar balls of external libraries, and download missing external dictionary extensions.
Start by including the environment variables prepared by configure into your current environment with
where <shell-script-name> depends on your platform:
Look into main/set_soenv for more platforms. (search for lines
$OUTPATH = "<platform>"; and the nearby line
$outfile = "<shell-script-name>";. Add the suffix
.sh for the bash variant.
If you want to build the whole office and the install sets then
cd main/instsetoo_native build --all
You may want to experiment with the -P options for multi process builds to reduce the build time.
build --all -P<m> -- -P<n>
tells build to use
m processes (build up to
m modules in parallel) and
n threads for each module.
Details about creating installation sets can be found here.
Building Apache OpenOffice uses a custom build command, build.pl, located in /main/solenv/bin. You may find it helpful to learn more about build options from the Build Documentation
Building the whole office takes a lot of time. Therefore it may be preferable to build only parts after making changes to the source code. There are two different types of partial builds:
- Can be used only when the code changes do not change exported interfaces. Use with care and only when you know what you are doing.
- Use for code changes that modify exported C++ or IDL interfaces, that modify resources that are used by other modules, or when you are not sure.
- If you are a new developer, you should probably always assume your changes are "incompatible" and follow the instructions for Incompatible Build.
Make Systems Used by Apache OpenOffice
For the following Build sections you should be aware that Apache OpenOffice uses two different make systems to build its modules.
- The older one is based on dmake
- The other and newer one is based on GNU make. This system is often referred to as gbuild.
When a module contains, among others, a Makefile and a Module_<module>.mk file then it is a gbuild module.
After changing code in module <module> which does not change any exported interfaces do
cd <module> build deliver
cd <module> make -sr
No explicit call to
to compile and deliver the resulting libraries to
You may want to erase the output of a previous compilation. In some cases a new compilation will not work correctly unless the old output is removed.
cd <module> build --from <module> --prepare
or faster (but without the un-deliver)
cd <module> rm -fr <platform>/
cd <module> make clean
Modifications that change exported interfaces require not only the module to be rebuild that contains the modified code. All depending modules (dependencies are defined in
<module>/prj/build.lst) have to be rebuild as well. This is best done from
cd main/instsetoo_native/ build --from <incompatible-module> --prepare build --from <incompatible-module>
The second line removes the output of all modules that have to be recompiled. The drawback of this command is that the output of modules which are build via gbuild are not removed. Thus, the following additional command performed after the second one will do the trick:
build --from <incompatible-module> --job="make clean; make clean debug=t" --ignore
Frequently used options
In order to add debug information to libraries and executables, add the
debug switch to any
cd <module> build debug=t
cd <module> make -sr debug=t
Remember that for the gbuild system you have to use the debug flag also when cleaning a module (otherwise eg the wrong precompiled headers are deleted and are not rebuilt):
make clean debug=t
You can force make to rebuild dependency information by first deleting it with the depend option. It would be rebuilt automatically with the next build:
cd <module> build depend=t build
cd <module> make -sr depend=t make -sr
In the event that you want to change configuration parameters used for building, you will probably need to "clean" your build output tree before starting again.
To do this, navigate to the "main" directory, then source your environment shell script as you did for building:
Step-by-Step Building Guide for Different Platforms
This section is intended as a collection of simple step-by-step recipes to build Apache OpenOffice from source code. A more thorough explanation of what the individual steps do and why they are necessary can be found in the other sections of this document.
The guides limit themselves to either relatively recent versions of operating systems, or systems in which the OpenOffice PMC are activity using. A historical version of the step-by-step guide for different platforms can be found here
Building Apache OpenOffice with an IDE
Additional Build Resources
It can be useful to build an older version of Apache OpenOffice on newer build environments, for example in order to regression test a bug in the latest version.
Older source code may need some integrations, that are described on this page: Building old versions.