Building on Windows
- 1 Overview
- 2 Requirements
- 3 Installation and Preparation of Build Tools
- 4 Full Builds
- 5 Partial Builds
- 6 Building a Module with Debug Information
- 7 Finding the Installation Sets
- 8 Tips And Tricks
- 9 See Also
- 10 Footnotes
For building OpenOffice.org Cygwin is needed, a Windows program that emulates a complete Unix command line environment. To use this document you need to be familiar with a command line, but you need not to be a UNIX shell wizard.
- 1 or more reasonable fast CPUs (x-way CPU recommended)
- 1 GB RAM (2 GB recommended)
- 10 GB free disk space (20 GB when debugging)
- Windows XP/Vista
- C/C++ Compiler:
- JDK 1.6 for DEV300 milestones >= m37 and all OOo310 versions (older milestones will fail in the hsqldb module)
- Windows SDK for Windows Server 2008. 1
- SDK Redistributable: GDI
- Cygwin Toolkit from with (dll version 1.5.10) or later
- unicows.dll from (Microsoft Layer for Unicode)2
- dbghelp.dll from Microsoft3
- Apache Ant (version 1.6.5 or later)
- prebuild Mozilla
- msvcr71.dll, msvcp71.dll
- Microsoft_VC90_CRT_x86.msm, Microsoft_VC90_DebugCRT_x86.msm, policy_9_0_Microsoft_VC90_CRT_x86.msm, policy_9_0_Microsoft_VC90_DebugCRT_x86.msm4
- optional: Nullsoft Scriptable Install System (NSIS)5
- optional: DirectX SDK6
Installation and Preparation of Build Tools
setting up cygwin
Go to http://www.cygwin.com/ and download and install the current version.
required additional packages
Cygwin consists of some basic and a lot of optional packages. As building OOo needs some of these optional packages you have to select them in the installer. Here's a complete list of the needed packages:
- Category Archive:
- Category Devel :
- openssl-devel (only needed for perl modules for CWS tooling, see below)
- cvs (for 2.x code line and 3.0 code line)
- subversion (for 3.x code line, minimum version 1.5.5)
- Category Libs
- Category Net
- Category Perl
- Category Shells
- Category Utils
- Category Web
Within the Cygwin Toolkit, some executables might be symlinks: awk.exe and gunzip.exe, tar.exe (in older releases only). This can lead to a break of the build later, and the symlinks should be replaced by copies of the command they link to.
To check this, execute:
ls -l /bin/awk.exe
whether e.g. awk.exe is a symlink. In version 1.5.24-2 awk.exe is a link to gawk.exe. The shell will show this by putting out “awk.exe -> gawk.exe”. In this case gawk.exe must be copied to awk.exe by executing:
cd /bin rm awk.exe cp gawk.exe awk.exe
In case you overlook something here or you have a newer Cygwin version with additional symlinks not mentioned here it's not a problem. You will get a helpful error message about an existing link in the configuration step (configure) later. The message will tell you which link you have to remove and you can do it following the advice given above for the awk.exe/gawk.exe pair.
installing additional perl modules in cygwin
As explained some perl modules must be installed with CPAN. The necessary command in the cygwin shell is
perl -MCPAN -e shell
If this command is executed the first time CPAN will ask for configuration. Choose autoconfiguration.
|Please note that CPAN is not able to deal with usernames containing spaces. To work around this fact, when CPAN asks you to specify the CPAN build and cache directory, change the default suggestion to |
At the end the CPAN shell appeared and is ready to accept commands for installations. Each module is installed by typing
install $MODULENAME. The modules that must be installed are:
- XML::Parser (though it seems that this is already installed; doesn't hurt to do it)
CPAN will detect if a selected module depends on other modules and it will offer to download them also. As explained please just confirm this.
adding required files to the build tree
Here's the list of files to download (with links) and the locations in the source tree where you must put them:
|Where to get||Place in|
|GDI+ Redistributable (Genuine Windows Validation required)||external/gdiplus|
|Only for OOo2.x but due to Issue 88652 in configure still needed for 3.x: unicows.dll||external/unicows|
|instmsiw.exe and instmsia.exe||external/msi|
|for 2005 compiler: msvcp80.dll and msvcr80.dll (found in c:\WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd/msvc||external/msvcp80|
|for 2008 compiler (until DEV300 m22): msvcp90.dll and msvcr90.dll (found in $(msvcdir)\Vc\redist\x86\Microsoft.VC90.CRT)||external/msvcp90|
|for 2008 compiler starting with DEV300m23: Microsoft_VC90_CRT_x86.msm and policy_9_0_Microsoft_VC90_CRT_x86.msm for non debug builds and Microsoft_VC90_DebugCRT_x86.msm and policy_9_0_Microsoft_VC90_DebugCRT_x86.msm for debug builds. These merge modules are available in VS08 Express Edition and VS08 Professional Edtion. All *.msm files are located at c:\Program Files\Common Files\Merge Module.||external/msm90|
| Mozilla binary distribution
|msvcr71.dll and msvcp71.dll for Mozilla libraries (Search for them in the Web or on your PC. These files should be named as all lower case. Sometimes when downloaded they are upper case and this will cause 'file not found' errors towards the end of the build))||external/msvcp71|
configure tool is used to create the environment. It checks that all software, hardware, and system requirements for the build are satisfied, and creates configuration files called winenv.set (for tcsh) and winenv.set.sh (for bash) that are used to set all necessary build environment variables. Before running configure, make sure that all needed programs are in the system path or start configure with the appropriate command line switches. If configure detects a problem it will stop and give you a useful hint how to fix it.
You will find the
configure script in
$SRC_ROOT. The resulting configuration files are created there too.
sample configure calls
./configure \ --disable-directx \ --with-cl-home="/cygdrive/d/develop/msvc/VC" \ --disable-activex \ --disable-atl \ --disable-build-mozilla \ --with-frame-home="/cygdrive/d/develop/MSDK/v6.1" \ --with-psdk-home="/cygdrive/d/develop/MSDK/v6.1" \ --with-midl-path="/cygdrive/d/develop/MSDK/v6.1/Bin" \ --with-asm-home="/cygdrive/d/develop/msvc/VC" \ --with-jdk-home="/cygdrive/d/develop/j2sdk1.4.2_11" \ --with-csc-path="/cygdrive/c/Windows/Microsoft.NET/Framework/v3.5" \ --with-ant-home=/ant \ --with-use-shell=bash
./configure --disable-build-mozilla --with-use-shell=bash --disable-activex --with-win32 --with-cl-home="/cygdrive/c/Program Files/Microsoft Visual Studio 9.0/VC" --with-midl-path="/cygdrive/c/Program Files/Microsoft SDKs/Windows/v6.1/Bin" --with-csc-path="/cygdrive/c/WINDOWS/Microsoft.NET/Framework/v3.5" --with-frame-home="/cygdrive/c/Program Files/Microsoft SDKs/Windows/v6.1" --with-asm-home="/cygdrive/c/Program Files/Microsoft Visual Studio 9.0/VC/Bin" --with-jdk-home="/cygdrive/c/j2sdk1.4.2_11" . --disable-directx --disable-epm --with-ant-home=/cygdrive/c/apache-ant-1.6.5 --with-psdk-home="/cygdrive/c/Program Files/Microsoft SDKs/Windows/v6.1"
configure settings tips
Template:Documentation/Note Template:Documentation/Tip Template:Documentation/Tip Template:Documentation/Tip Template:Documentation/Tip Template:Documentation/Tip Template:Documentation/Tip Template:Documentation/Tip Template:Documentation/Tip
After running configure you must create the dmake make utility that is needed for the build of OpenOffice.org. This done from the SRC_ROOT directory by calling
setting the enviroment
When the configure script has been run successfully a file
winenv.Set.sh was created7. Do this:
to set up the enviroment for the build.
starting the build
Build the software by typing the following in
The building procedure will take at least an hour (on a 3 GHz Quad-Core with 8GB RAM).
There are some special things in the way how OOo builds its modules. Every module has an “output” folder (with some subfolders for the different kinds of generated output) that is created the first time a build is done in the module. The name of this folder is “wntmsci10.pro” for builds with MSVC++2003, “wntmsci11.pro” for builds with MSVC++2005 and "wntmsci12.pro" for builds with MSVC++2008 (for the meaning of the "pro" extension see below). After a successful build of a module some of the generated files are copied to the output folder of the “solver” module by executing a tool called “deliver” (this is automatically called by build --all for each of the modules). Other modules will take these “delivered” files (header files, libraries etc.) to resolve their dependencies. The content of the solver module will also be used to pack the installation sets in the final step.
There are two ways to do partial builds:
Only do compatible partial builds if you know exactly what you are doing. Template:Documentation/Note
rebuilding from a module (incompatible build)
If you decide to change a module in an incompatible way, you will need to rebuild all modules depending on it (directly or indirectly):
cd $SRC_ROOT/instsetoo_native build --from $INCOMPATIPLEMODULE --prepare build --from $INCOMPATIBLEMODULE
rebuilding a module (compatible build)
To rebuild a module you can delete all output directories with, rebuild and redeliver into the solver with:
cd $MODULE build --from $MODULE --prepare build && deliver
$SRC_ROOT/instsetoo_native will recreate the installation sets, provided all other modules have already been build.9
Building a Module with Debug Information
To rebuild a module with debug information and additional assertions and checks, run:
cd $MODULE build --from $MODULE --prepare # removes old output trees and solver build debug=true --from $MODULE
Drop the newly created binaries into an existing installation. Building an installation set with them will not help, as binaries are stripped on packing by default.
Finding the Installation Sets
After a successful build you will find the OOo installation set in
“instsetoo_native” is the module that packs the installation set.
Tips And Tricks
For Windows: download from here, do the following:
export CCACHE_DIR="some/place/with/space" ccache -M 2G -F 10000 export CCACHE_CPP2=TRUE export CXX="guw.pl ccache cl" # export USE_PCH= if you experience trouble with precompiled headers
If you set the environment variable
TRUE, then dependendy information files are not created - the build finishes faster.
|But only enable that on a clean build. Once you have built OOo and then made modifications, unset the variable again to be on the safe side.|
Similar to the
nodep variable, this one prevents the generation of HIDs (Help IDs) that are mainly used for automated testing - if you only want to build OOo, you don't need those.
If you have a multiprocessor machine or similar, you can run a parallel build. There are two levels of parallelism - one operating on makefile level, the other one on module level
parallelism on the directory level
export MAXPROCESS=<numer or processes>
This tells dmake how many targets it is allowed to build in parallel
parallelism on the module level
For parallelism on the module level, you have to run build from
$SRC_ROOT>/instsetoo_native with the
-P<number> switch, for example:
create prebuilt mozilla
For the mozilla-components you have the choice to either build from mozilla sources, to use precompiled packages or to use system-mozilla (the one installed on your buildsystem, not everything might work, depending on the version you got installed). You can easily create your own version of the prepacked binaries if you wish to do so (either because you cannot use the official ones because of mismatch of compiler version used to build them/other technical reasons or because you want to use stuff you didn't build yourself). To do so:
- build the
mozmodule from the mozilla sources
--enable-build-mozillawhen running configure and put the mozilla-source tarball to
dmake zipto create the zip files
- you'll find the zips in
Copy them to a location of your liking.
Now instead of using
--disable-build-mozilla and copy the zips you created or downloaded to
moz/zipped and these will be used when compiling.
This will greatly reduce build-time (you save the time that would otherwise be spent on compiling mozilla).
|It used to be that newer version of NSIS broke the build (see Issue 85657 ), but it seems that in now works for NSIS up to 2.3.7.|
|Current (as of 2008/01) versions of the DirectX9 SDK and Windows Platform SDK do not fit to each other. To be able to build with DirextX enabled, you need to patch one file in the Platform SDK. See http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID2743771 for details.|
|Content on this page is licensed under the Public Documentation License (PDL).|