Difference between revisions of "Documentation/SL/How Tos/Calc: Funkcija CONVERT ADD"

From Apache OpenOffice Wiki
Jump to: navigation, search
(Created page with '__NOTOC__ == CONVERT_ADD == Converts a number from one measurement system to another. This function is only available if the '''Analysis AddIn''' is installed. === Syntax: ===…')
 
(→‎CONVERT_ADD)
Line 2: Line 2:
  
 
== CONVERT_ADD ==
 
== CONVERT_ADD ==
−
Converts a number from one measurement system to another.
+
Pretvori število iz enega merskega sistema v drugega.
  
−
This function is only available if the '''Analysis AddIn''' is installed.
+
Ta funkcija je na voljo le, če je nameščen '''Dodatek za analizo (Analysis AddIn)'''.
  
−
=== Syntax: ===
+
=== Skladnja: ===
−
<tt>'''CONVERT_ADD(number; originalunits; newunits)'''</tt>
+
<tt>'''CONVERT_ADD(število; izvorneenote; noveenote)'''</tt>
−
: <tt>'''number'''</tt> is the number to be converted.
+
: <tt>'''število'''</tt> je število, ki ga želimo pretvoriti.
  
−
: <tt>'''originalunits'''</tt> and <tt>'''newunits'''</tt> are text representing the original and new measurement systems. These are case-sensitive, and must be selected from the table below. Units in '''bold''' accept an optional prefix as a decimal multiplier from the table below that.
+
: <tt>'''izvorneenote'''</tt> in <tt>'''noveenote'''</tt> so besedilo, ki predstavlja izvorni in novi merski sistem. These are case-sensitive, and must be selected from the table below. Units in '''bold''' accept an optional prefix as a decimal multiplier from the table below that.
  
 
{| border="1" cellpadding="5" cellspacing="0" style="margin: 1em auto 1em auto"
 
{| border="1" cellpadding="5" cellspacing="0" style="margin: 1em auto 1em auto"
 
|-
 
|-
−
|'''property'''||'''units'''
+
|'''lastnost'''||'''enote'''
 
|-
 
|-
−
|Weight||'''g''', sg, lbm, '''u''', ozm, stone, ton, grain, pweight, hweight, shweight, brton
+
|teža||'''g''', sg, lbm, '''u''', ozm, stone, ton, grain, pweight, hweight, shweight, brton
 
|-
 
|-
−
|length||'''m''', mi, Nmi, in, ft, yd, ang, Pica, ell, '''parsec''', '''lightyear''', survey_mi
+
|dolžina||'''m''', mi, Nmi, in, ft, yd, ang, Pica, ell, '''parsec''', '''lightyear''', survey_mi
 
|-
 
|-
−
|time||yr, day, hr, mn, '''sec''', '''s'''
+
|čas||yr, day, hr, mn, '''sec''', '''s'''
 
|-
 
|-
−
|pressure||'''Pa''', '''atm''', '''at''', '''mmHg''', Torr, psi
+
|pritisk||'''Pa''', '''atm''', '''at''', '''mmHg''', Torr, psi
 
|-
 
|-
−
|force||'''N''', '''dyn''', '''dy''', lbf, '''pond'''
+
|sila||'''N''', '''dyn''', '''dy''', lbf, '''pond'''
 
|-
 
|-
−
|energy||'''J''', '''e''', '''c''', '''cal''', '''eV''', '''ev''', HPh, '''Wh''', '''wh''', flb, BTU, btu
+
|energija||'''J''', '''e''', '''c''', '''cal''', '''eV''', '''ev''', HPh, '''Wh''', '''wh''', flb, BTU, btu
 
|-
 
|-
−
|power||'''W''', '''w''', HP, PS
+
|moč||'''W''', '''w''', HP, PS
 
|-
 
|-
−
|field strength||'''T''', '''ga'''
+
|jakost polja||'''T''', '''ga'''
 
|-
 
|-
−
|temperature||C, F, '''K''', '''kel''', Reau, Rank
+
|temperatura||C, F, '''K''', '''kel''', Reau, Rank
 
|-
 
|-
−
|volume||'''l''', '''L''', '''lt''', tsp, tbs, oz, cup, pt, us_pt, qt, gal, '''m3''', mi3, Nmi3, in3, ft3, yd3, ang3, Pica3,  
+
|prostornina||'''l''', '''L''', '''lt''', tsp, tbs, oz, cup, pt, us_pt, qt, gal, '''m3''', mi3, Nmi3, in3, ft3, yd3, ang3, Pica3,  
  
 
barrel, bushel, regton, Schooner, Middy, Glass
 
barrel, bushel, regton, Schooner, Middy, Glass
 
|-
 
|-
−
|area||'''m2''', mi2, Nmi2, in2, ft2, yd2, '''ang2''', Pica2, Morgen, '''ar''', acre, ha
+
|površina||'''m2''', mi2, Nmi2, in2, ft2, yd2, '''ang2''', Pica2, Morgen, '''ar''', acre, ha
 
|-
 
|-
−
|speed||'''m/s''', '''m/sec''', m/h, mph, kn, admkn
+
|hitrost||'''m/s''', '''m/sec''', m/h, mph, kn, admkn
 
|-
 
|-
−
|information||'''bit''', '''byte'''
+
|informacija||'''bit''', '''byte'''
 
|}
 
|}
  
Line 49: Line 49:
 
{| border="1" cellpadding="5" cellspacing="0" style="margin: 1em auto 1em auto"
 
{| border="1" cellpadding="5" cellspacing="0" style="margin: 1em auto 1em auto"
 
|-
 
|-
−
|'''prefix < 1'''||y (10<sup>-24</sup>), z (10<sup>-21</sup>), a (10<sup>-18</sup>), f (10<sup>-15</sup>), p (10<sup>-12</sup>), n (10<sup>-9</sup>), u (10<sup>-6</sup>), m (10<sup>-3</sup>), c (10<sup>-2</sup>), d (10<sup>-1</sup>)
+
|'''predpona < 1'''||y (10<sup>-24</sup>), z (10<sup>-21</sup>), a (10<sup>-18</sup>), f (10<sup>-15</sup>), p (10<sup>-12</sup>), n (10<sup>-9</sup>), u (10<sup>-6</sup>), m (10<sup>-3</sup>), c (10<sup>-2</sup>), d (10<sup>-1</sup>)
 
|-
 
|-
−
|'''prefix > 1'''|| e (10<sup>1</sup>), h (10<sup>2</sup>), k (10<sup>3</sup>), M 10<sup>6</sup>), G (10<sup>9</sup>), T (10<sup>12</sup>), P (10<sup>15</sup>), E (10<sup>18</sup>), Z (10<sup>21</sup>), Y (10<sup>24</sup>)
+
|'''predpona > 1'''|| e (10<sup>1</sup>), h (10<sup>2</sup>), k (10<sup>3</sup>), M 10<sup>6</sup>), G (10<sup>9</sup>), T (10<sup>12</sup>), P (10<sup>15</sup>), E (10<sup>18</sup>), Z (10<sup>21</sup>), Y (10<sup>24</sup>)
 
|}
 
|}
  
−
=== Example: ===
+
=== Primer: ===
 
<tt>'''CONVERT_ADD(120;"in";"ft")'''</tt>
 
<tt>'''CONVERT_ADD(120;"in";"ft")'''</tt>
−
: returns <tt>'''10'''</tt>, the number of feet in 120 inches.
+
: vrne <tt>'''10'''</tt>, število stopal v 120 palcih.
  
 
<tt>'''CONVERT_ADD(10;"yd";"cm")'''</tt>
 
<tt>'''CONVERT_ADD(10;"yd";"cm")'''</tt>
−
: returns <tt>'''914.4'''</tt>, that is 10 yards expressed in centimetres.
+
: vrne <tt>'''914,4'''</tt>, to je 10 jardov, izraženih v centimetrih.
  
 
=== Issues: ===
 
=== Issues: ===
−
* For historical reasons, many of the units do not use international standard abbreviations.
+
* Iz zgodovinskih razlogov številne enote ne uporabljajo standardiziranih mednarodnih okrajšav.
−
* This function is not generally compatible with other spreadsheets.
+
* Ta funkcija v splošnem ni združljiva z drugimi preglednicami.
  
  
 
{{Documentation/SeeAlso|
 
{{Documentation/SeeAlso|
−
* [[Documentation/How_Tos/Calc: CONVERT function|CONVERT]]
+
* [[Documentation/SL/How_Tos/Calc: Funkcija CONVERT|CONVERT]]
  
−
* [[Documentation/How_Tos/Calc: Mathematical functions|Mathematical functions]]
+
* [[Documentation/SL/How_Tos/Calc: Matematične funkcije|Matematične funkcije]]
  
−
* [[Documentation/How_Tos/Calc: Functions listed alphabetically|Functions listed alphabetically]]
+
* [[Documentation/SL/How_Tos/Calc: Funkcije po abecedi|Funkcije po abecedi]]
−
* [[Documentation/How_Tos/Calc: Functions listed by category|Functions listed by category]]}}
+
* [[Documentation/SL/How_Tos/Calc: Funkcije po kategorijah|Funkcije po kategorijah]]}}
 
[[Category: Documentation/Reference/Calc/Mathematical functions]]
 
[[Category: Documentation/Reference/Calc/Mathematical functions]]

Revision as of 18:07, 29 May 2010


CONVERT_ADD

Pretvori število iz enega merskega sistema v drugega.

Ta funkcija je na voljo le, če je nameščen Dodatek za analizo (Analysis AddIn).

Skladnja:

CONVERT_ADD(število; izvorneenote; noveenote)

število je število, ki ga želimo pretvoriti.
izvorneenote in noveenote so besedilo, ki predstavlja izvorni in novi merski sistem. These are case-sensitive, and must be selected from the table below. Units in bold accept an optional prefix as a decimal multiplier from the table below that.
lastnost enote
teža g, sg, lbm, u, ozm, stone, ton, grain, pweight, hweight, shweight, brton
dolžina m, mi, Nmi, in, ft, yd, ang, Pica, ell, parsec, lightyear, survey_mi
čas yr, day, hr, mn, sec, s
pritisk Pa, atm, at, mmHg, Torr, psi
sila N, dyn, dy, lbf, pond
energija J, e, c, cal, eV, ev, HPh, Wh, wh, flb, BTU, btu
moč W, w, HP, PS
jakost polja T, ga
temperatura C, F, K, kel, Reau, Rank
prostornina l, L, lt, tsp, tbs, oz, cup, pt, us_pt, qt, gal, m3, mi3, Nmi3, in3, ft3, yd3, ang3, Pica3,

barrel, bushel, regton, Schooner, Middy, Glass

površina m2, mi2, Nmi2, in2, ft2, yd2, ang2, Pica2, Morgen, ar, acre, ha
hitrost m/s, m/sec, m/h, mph, kn, admkn
informacija bit, byte
The above units may be preceded by a decimal multiplier. For example k (kilo) is the prefix for 103 - so km means kilometres. If the unit is a measure of area the multiplier is squared, and if it is a measure of volume the multiplier is cubed. For example km2 means square kilometres, that is 106 square metres. The following table lists the prefixes:
predpona < 1 y (10-24), z (10-21), a (10-18), f (10-15), p (10-12), n (10-9), u (10-6), m (10-3), c (10-2), d (10-1)
predpona > 1 e (101), h (102), k (103), M 106), G (109), T (1012), P (1015), E (1018), Z (1021), Y (1024)

Primer:

CONVERT_ADD(120;"in";"ft")

vrne 10, število stopal v 120 palcih.

CONVERT_ADD(10;"yd";"cm")

vrne 914,4, to je 10 jardov, izraženih v centimetrih.

Issues:

  • Iz zgodovinskih razlogov številne enote ne uporabljajo standardiziranih mednarodnih okrajšav.
  • Ta funkcija v splošnem ni združljiva z drugimi preglednicami.


Template:Documentation/SeeAlso

Retrieved from "https://wiki.openoffice.org/w/index.php?title=Documentation/SL/How_Tos/Calc:_Funkcija_CONVERT_ADD&oldid=169586"
Personal tools